rickys1955
Member
| Joined: | Sat Feb 27th, 2010 |
| Location: | |
| Posts: | 1 |
| Status: |
Offline
|
|
Today I was stripping a cabinet in the garage and the vapors must have tripped the fvir sensor. I had the garage door open, must have not been enough circulation. Anyway I discovered later the pilot light was out. After being sure all vapors were clear I re-lit the pilot and all seems fine. My Kenmore manual says if the fvir detects a vapor incident the heater must be replaced. Is this true or is there a safety issue ? Any advice appreciated.
|
