View single post by elenano
 Posted: Wed Oct 17th, 2018 06:07 pm
PM Quote Reply Full Topic
elenano



Joined: Sat Sep 11th, 2004
Location: USA
Posts: 3945
Status: 
Offline
There may be another way to do it, but it won't work as Larry described because the powered anode sits in the top port of the tee. I suggest testing with a multimeter and possibly turning down the output some. At some point, e-mail me at mail@waterheaterrescue.com for testing instructions, and remind me who you are and the details of the situation. You won't want to turn it down too much, though, or you'll compromise the protection it gives the water heater.

Randy Schuyler

Last edited on Wed Oct 17th, 2018 06:07 pm by elenano