View single post by LikesHotWater
 Posted: Wed Jan 30th, 2019 06:43 am
PM Quote Reply Full Topic
LikesHotWater

 

Joined: Thu Jan 24th, 2019
Location: California USA
Posts: 10
Status: 
Offline
Hi Larry,

As always, thanks for the input. I went through the dip tube on Sunday. It is intact though I suspected that it may have shrunk in overall diameter, which would shrink the holes which disperse the incoming cold water. There were 7 small holes and all were clear.

I have seen some dip tubes that are straight and open on the bottom, mine is curved with the holes facing down. The end is closed,

Needless to say, opening up the existing holes and adding 8 more did not improve the flow.

I took a video and will post to Youtube tomorrow.

Regards,

Bob H.:shock::shock: